Introduction
Symbols used
12
Symbols used
The following symbols are used in this user manual:
CAUTION!
This safety warning describes dangerous situations in which fatal injuries or severe injuries can occur.
ATTENTION!
This safety warning describes dangerous situations in which material damage to the inspection system or to other objects can occur.
NOTE!
This symbol identifies instructions that are important for economical use of the system and that facilitate its use.
NOTE!
This symbol indicates proper and prescribed disposal of the system and its components. The owner of the system is responsible for
proper disposal! See the note on page 81 concerning device take-back at the end of service life.
MAINTENANCE!
This symbol indicates instructions that explain how to properly clean and maintain the system to prevent defects and major repairs.
The service life of your system can be significantly extended through proper care.
FACILITATED WORKSTEP!
If you perform this work step you can execute the described function faster.
To Next Page
Loading...