iPEK VISIONCONTROL VC200 - Automatic Camera Centering

Executing the inspection
Device Control
92
Automatic camera centering
Device Control
Help ExitSystem-Status
Camera Movement & Locator
Miscellaneous
Camera & Laser
Crawler
Clutch
ON
Slow
Secure
Mode
OFF
Aux. Light
- +
0%
Video Source
Internal External
Others
Reel
Standard
Mode
Camera
Auto
Center
By pressing the automatic camera centering button the camera head is centrally positioned within the pipe.
NOTE!
Should the pipe diameter change during inspection the camera centering function must be activated again.
• Select the desired option for the crawler.