User interface
Sections
64
Editing section properties
If you have opened a project in the lower function button bar, select the section button. All sections belonging to this project are listed in the
Segment Overview dialog. Select the section that you would like to edit and change the values.
• Select section.
• Select the section that must be edited in the Section Overview.
• Confirm the procedure by clicking the Continue button.
After you have confirmed the dialog with Continue, the view changes directly to the inspection view. You can start or continue your inspection.
For information on recording inspection data, such as video data, screenshot data, or event data, read the chapter “Execution of the inspection”
starting on Seite 75.
Rename Section
The software determines the name of a section automatically by default. You also have the option to set the section name yourself.
• Select RENAME SECTION.
• Enter the new section name and select OK.
NOTE!
A section name within a project always has to unique, a project cannot contain two sections with the same name.
To Next Page
Loading...