Executing the inspection
Inspection Menu
109
• Select ZOOM + or ZOOM to enlarge or shrink the preview graphic.
NOTE!
You can only open the system dialog Protocol Preview when you have selected a section.
NOTE!
While the inclination measurement is running, the inclination protocol does not necessarily display the current state of the
measurement. This is only possible when the measurement is inactive.
Inclination measurement
In the inclination measurement dialog you can control the inclination measurement and edit existing measurement data.
NOTE!
Please note that the functionality of automatic inclination measurement depends on your system. Without a connected crawler with
a built-in inclination sensor an automatic inclination measurement is not possible.
To Next Page
Loading...