3─73
Map Setting
1. Fill Land Area
ON
2. C-MAP Setting >
3. JRC/ERC Setting >
4. Contour Setting >
5. Map Display Setting >
6. Select JRC Chart File >
7. Map Draw AZI Mode
N UP
8. JRC Chard Draw Mode
FAST
0. EXIT
3.7.3 Fill Charts (Fill Land Area)
This function fills the chart when JRC/ERC card is in use.
Procedures 1 Press [RADAR MENU] key twice.
Press [9] key.
Press [5] key.
The Map Setting Menu will appear.
2 Press [1] key.
The setting of Fill Land Area will be
switched between ON and OFF.
ON : Charts are filled.
OFF : Charts are not filled.
To Next Page
Loading...
Need help?
General
