SECTION 3
BASIC OPERATION
3.1 FLOW OPERATION ......................................................................................3-1
3.1.1 Power ON and Start the System ......................................................3-2
3.1.2 Observe and Adjust Video................................................................3-3
3.1.3 Acquire and Measure Data ............................................................... 3-3
3.1.4 End the Operation and Stop the System......................................... 3-4
3.2 MENU COMPOSITION.................................................................................. 3-5
3.2.1 Overview of Menu Structure ............................................................3-5
3.2.2 Basic Menu Operation ......................................................................3-6
3.3 PREPARATION .............................................................................................3-8
3.3.1 Adjust Display Brilliance .................................................................. 3-8
3.3.2 Adjust Contrast ................................................................................. 3-8
3.3.3 Adjust Operation Panel Brilliance [PANEL] ....................................3-9
3.3.4 Switch Day/Night Mode [DAY/NIGHT].............................................. 3-9
3.3.5 Adjust Brilliance of Information on Radar Display
(Brilliance Setting) ..........................................................................3-10
3.3.6 Adjust Sound Volume (Buzzer Volume) ........................................ 3-11
3.3.7 Reset Alarm Buzzer [ALARM ACK]................................................ 3-11
3.3.8 Set Display Color ............................................................................3-12
3.4 BASIC OPERATIONS .................................................................................3-14
3.4.1 Start Transmission [TX/PRF].......................................................... 3-14
3.4.2 Stop Transmission [STBY] ............................................................. 3-14
3.4.3 Change Range (Observation Range Scale) [RANGE+/-].............. 3-14
3.4.4 Tune.................................................................................................. 3-15
3.4.5 Control Sensitivity [GAIN/PL] ........................................................ 3-15
3.4.6 Suppress Sea Clutter [AUTO-SEA]................................................3-16
3.4.7 Suppress Rain/Snow Clutter [AUTO-RAIN] ..................................3-18
3.4.8 Reject Radar Interference [IR]........................................................ 3-20
3.4.9 Hide/Display Range Rings (RINGS)...............................................3-21
3.4.10 Hide Ship’s Heading Line (HL OFF)...............................................3-21
3.4.11 Hide Graphics Information on Radar Display
(Graphic Display) ............................................................................3-22
3.5 GENERAL OPERATIONS ...........................................................................3-23
3.5.1 Move Cross Cursor Mark by Trackball .......................................... 3-23
3.5.2 Use EBLs (Electronic Bearing Lines) [EBL1/2] ............................3-24
3.5.3 Set EBL Operation (EBL1 /2 Setting)............................................. 3-26
3.5.4 Display Variable Range Markers [VRM1/VRM2]............................ 3-29
3.5.5 Display Parallel Index Lines (Parallel Index Line)........................3-32
3.5.6 Switch Bearing Display Mode [AZI MODE] ...................................3-40
3.5.7 Switch True/Relative Motion Display Mode [TM/RM] ...................3-41
3.5.8 Move Own Ship’s Display Position [OFF CENT] .......................... 3-42
3.5.9 Display Other Ships’ Trails [TRAILS]............................................. 3-43
3.5.10 Switch Pulse Length (GAIN/PL) ..................................................... 3-46
3.5.11 Expand Targets (Target Enhance)..................................................3-47
3.5.12 Use Video Process (Process) ........................................................3-48
3.5.13 Zoom................................................................................................ 3-49
3.5.14 Use Marker [MOB]........................................................................... 3-50
3.5.15 Marking [MARK].............................................................................. 3-51
3.5.16 Operate EBL Maneuver Function (EBL Maneuver) ...................... 3-52
3.5.17 Operate Multi-Function Control [MULTI]....................................... 3-55
3.5.18 Operate User Key Switches [User Key 1/2] .................................. 3-57
3.5.19 Operation of Guard Zone [ATA Guard Zone] ................................ 3-59
3.5.20 Radar Alarm (Radar Alarm) ............................................................ 3-62
3.6 DISPLAY OWN SHIP’S TRACK ................................................................. 3-66
3.6.1 Display Own Ship’s Track (Display Own Track)........................... 3-66
3.6.2 Set Own Ship’s Track Data Storage Interval
(Own Track Interval) ....................................................................... 3-68
3.6.3 Clear Own Ship’s Track Data (Clear Own Track).......................... 3-69
3.6.4 Cancel Storing of Own Ship’s Track Data
(Own Track Memory) ...................................................................... 3-70
3.7 DISPLAY CHARTS...................................................................................... 3-71
3.7.1 Display Coastline ROM Card Produced by JRC........................... 3-71
3.7.2 Display ERC Card ........................................................................... 3-72
3.7.3 Fill Charts (Fill Land Area) ............................................................. 3-73
3.8 DISPLAY NAVIGATION INFORMATION..................................................... 3-74
3.8.1 Display Waypoint Marks (Waypoint Display)................................ 3-74
3.8.2 Display Navigation Information (NAV Display Setting) ............... 3-75
3.8.3 Create/Edit Navigation Information (Edit User Map).................... 3-76
3.8.4 Set Navigation Information (User Map Setting) ........................... 3-82
3.8.5 Set and Display Geodetic System................................................. 3-89
3.9 OPERATE PERFORMANCE MONITOR (PM DISPLAY)............................ 3-91
3.9.1 Operation Procedures.................................................................... 3-91
3.10 APPLIED OPERATIONS............................................................................. 3-97
3.10.1 Set Radar Signal Processing (Process Setting) .......................... 3-97
3.10.2 Set Radar Trails (RADAR Trails Setting)..................................... 3-100
3.10.3 Set Cursor (Cursor Setting) ......................................................... 3-104
3.10.4 Set Screen ..................................................................................... 3-105
3.10.5 Set Scanner (TRX Setting) ........................................................... 3-109
3.10.6 Set Chart Display (Map Setting) ...................................................3-111
3.10.7 Set LORAN C (LORAN C Correction) .......................................... 3-123
3.11 USE FUNCTION SWITCH [FUNC] ........................................................... 3-124
3.11.1 Operation Procedures .................................................................. 3-124
3.11.2 Function Setting Menu Items....................................................... 3-125
3.11.3 Overview of Function Operations ............................................... 3-126
3.11.4 Overview of Stored Function Setting Data ................................. 3-129
3.11.5 Personal Information (PIN Setting) ............................................. 3-130
3.12 USING CARD............................................................................................ 3-133
3.12.1 Save in and Transfer to Card (MEM CAPA/Copy)....................... 3-134
3.12.2 Erase/Initialize Card Memory (CLR MEM INIT Card).................. 3-140
To Next Page
Loading...
