5─29
5.2.7 ATA Simulation
CAUTION
Simulation is a function to check whether the ATA
system is operating normally. Do not use this
function except when checking the ATA operation.
In particular, if this mode is used during
navigation, pseudo targets appear on the radar
display, which may be confused with the actual
targets. Do not use this mode during navigation.
Otherwise, this may cause accidents.
The following simulation to be used for ATA can be referred to and modified:
[I] Test Video: Test video for use in checking the operation of the target detection circuit.
[II] ATA Simulator: Pseudo targets are generated on the radar display to check whether the ATA
functions are operating normally.
[III] Status: Displays the ATA status.
[IV] Gate Display: Gate size to acquire and track targets.
To Next Page
Loading...
Need help?
General
