JRC JMA-5206 User Manual

3─140
3
3.12 USING CARD
y
y y
3.12.2 Erase/Initialize Card Memory (CLR MEM/INIT Card)
Erase saved information from inside the processor.
[I] Erase Mark/Line (CLR Mark/Line Data)
Erase saved mark/line from inside the processor.
Procedures 1 Press [RADAR MENU] key twice.
The Radar Menu will appear.
2 Press [9] key.
The Plot Menu will appear.
3 Press [7] key.
The CLR MEM/INT Menu will appear.
4 Press [1] key.
A window will appear to select whether or not
marks/lines should be erased.
1. Erased
2: Cancel
CLR MEM/ INIT Card
1. CLR Mark/Line Data
2.CLR WPT/Route Data
3. Format Card 2
0. EXIT

JRC JMA-5206 Specifications

General

Brand	JRC
Model	JMA-5206
Category	Marine Radar
Language	English