5─2
5.1 PREPARATION
yy
yyy
5
5.1 PREPARATION
This section explains the features of ATA and AIS functions, and the initial setting for using each function.
The two plotting functions below are available with this radar equipment.
An optional device is necessary for using each of the ATA, and AIS functions.
ATA (Automatic Tracking Aid) function
The ATA function calculates the course and speed of a target by automatically tracking the target’s move.
The ATA function enables automatic acquisition of targets by using the guard zone function.
The ATA function is available when the ATA option is installed.
AIS (Automatic Identification System) function
The AIS function shows the target’s information on the radar display, using other ships’ information sent
out from the AIS unit.
The AIS function is available when the optional AIS interface is installed.
To Next Page
Loading...
Need help?
General
