6.5 DISPLAY OF RADAR TRANSPONDER
(SART)
The SART (Search and rescue Radar Transponder) is a survival device authorized by the GMDSS (Global
Maritime Distress and Safety System), which is used for locating survivors in case that a distress accident
occurs at sea. The SART is designed to operate in the 9 GHz frequency band.
When receiving the 9 GHz radar signal (interrogating signal) transmitted from the radar equipment on a rescue
ship or search aircraft, the SART transmit a series of response signals to inform the distress position to the
rescue and search party.
* This radar provides a shortcut item to make settings for SART signal reception. Execution of this item
automatically switches to the setting for SART reception.
0. EXIT
9. RADAR MENU(→ Plot)
ON
8. Graphic Display
6. NAV Information ＞
ON
5. SART
OFF
4. Zoom
OFF
3. Target Enhance
PROC OFF
2. Process
IR OFF
1. IR
MAIN MENU
Procedures 1 Press [RANGE +] or [RANGE -] to
set the radar range to 6 NM or 12
NM.
2 Press [RADAR MENU].
The Main Menu will appear.
3 Press [5].
Each time the key is pressed, switching between
ON and OFF takes place.
6─9
To Next Page
Loading...
Need help?
General
