5─51
5.3.7 Setting ATA Symbol Display Function
(ATA Symbol Display)
Set the ATA symbol display function to ON/OFF.
This function is effective only when the AIS display function (option) is set to ON.
This function is unavailable when the AIS display function is set to OFF.
This function holds data even though the ATA display is set to OFF.
For the AIS display function, see Section 5.3.2 on page 5-45.
Procedures 1 Press [ATA MENU] key.
Press [2] key.
The AIS Setting menu will appear.
2 Press [3] key.
The ATA Symbol Display Function is
switched ON or OFF.
ON Enables the ATA symbol display
function.
OFF: Disables the ATA symbol display
function.
* Button on the radar display on page 2-7 is also available to switch between ON and OFF.
AIS Setting
1. AIS Function
OFF
2. AIS Symbol Display
OFF
3. ATA Symbol Display
ON
4. CPA Limit
1 nm
5. TCPA Limit
1 min
6. AIS Filter Setting >
7. Identical Distance
100 m
0. EXIT
27
To Next Page
Loading...
