8─3
Self Test
1. Memory Test
2. Sensor Test
3. Line Test
0. EXIT
[I] Self-diagnosis function
Check of Memory, Scanner Unit, and Communications Lines
Memory Test
1) Memory check
Sensor Test
2) Antenna check
Line Test
3) Communication line check
Procedures 1 Press [1] key while the Test Menu is
open.
The SELF TEST Menu will appear.
2 Select the item you want to check,
pressing numeric keys [1] to [3] .
The SELF CHECK Menu will appear.
Exit 1 Press [RADAR MENU] key.
The Self Test Menu will be closed.
To Next Page
Loading...
Need help?
General
