3─28
3
3.5 BASIC OPERATIONS
y
y y
[V] Setting the EBL1 bearing fix mode (EBL1 Bearing FIX)
While this function is set to ANGLE , an EBL is fixed to the preset bearing. For example, if the true
bearing 020° is preset, the EBL is fixed to the true bearing 020° even when the own ship turns.
While the function is set to SCREEN , the EBL is fixed on the radar display.
Procedures 1 Press [RADAR MENU] key twice.
Press [3] key
Press [1] key.
The EBL1 Setting Menu will appear.
2 Press [3] key.
The setting of EBL1 Bearing Fix will be
switched between ANGLE and
SCREEN .
ANGLE : EBL1 bearing is fixed to the
preset value.
SCREEN : EBL1 bearing is fixed on the
radar display.
[VI] Setting the EBL2 bearing fix mode (EBL2 Bearing Fix)
Procedures 1 Press [RADAR MENU] key twice.
Press [3] key.
Press [2] key.
The EBL2 Setting Menu will appear.
Subsequently, set the EBL2 bearing fix mode performing the same operation as explained in
[V].
Note: The course data is required for activating this function.
EBL1 Setting
1. EBL1 Bearing REF
RUE
2. EBL1 Floating
OFF
3. EBL1 Bearing Fix
SCREEN
0. EXIT
To Next Page
Loading...
Need help?
General
