JUKI Sewing Machine - Basic Operation of the Sewing Machine

–
94
–
9-4 Basic operation of the sewing machine
(1) Prepare the materials.
Prepare left and right sleeves, and garment body.
(2) Turn the power ON.
(3) Perform sewing.
1
2
1) Turn the power switch ON.
2) Data input screen is displayed after the initial
screen was displayed.
Auto-lifter does not work until the
screen moves to the sewing screen.
After it has worked, it works in all
screens. So, be careful.
3) Set sleeves and garment body on the sewing
machine.
4) Start sewing.
1) Press READY switch
1
to change over
the screen to sewing screen.
When the shirring amount level in the
manual screen is the pedal neutral
state (state that the pedal is not de-
pressed) and not "0", refer to "21-2
Performing the auxiliary pedal set-
ting" and perform readjustment.
2) Input set value with SHIRRING AMOUNT FOR
AUXILIARY FEED buttons
2
.