JUKI Sewing Machine - Operation of the SEWING Machine (SEMI-Automatic Application Volume); Correcting the Pattern; Changing the Needle Thread Tension of Specified Step <Compensation Thread Tension Setting

–
31
–
6. OPERATION OF THE SEWING MACHINE (SEMI-AUTOMATIC APPLICATION VOLUME)
6-1 Correcting the pattern
(1) Changingtheneedlethreadtensionofspeciedstep<Compensationthreadtensionsetting>
* This is the function to add the needle thread ten-
sion of the specied step to the overall needle
thread tension as much as "compensation nee-
dle thread tension set value".
1) Press STEP SELECTION button
1
to select the step.
2) Press STEP DETAILS button
2
.
4) Press ten keys
4
to change com-
pensation thread tension set value
A
.
When inputting the minus numeral in
the ten key pop-up screen, press the
minus button after inputting "0" and
input the numeral.
5) Press ENTER button
5
.
3) Press COMPENSATION THREAD TENSION
button
3
.
A
4
5
3
1
2