JUKI Sewing Machine - Count-Up Releasing Procedure; Registering and the Pattern to Direct Button and Releasing the Pattern from Direct Button; How to Register

–
108
–
11-2 Count-up releasing procedure
When count-up condition is reached during sew-
ing work, the count-up screen is displayed and the
buzzer beeps. Press CLEAR button
1
to re-
set the counter and the screen returns to the sewing
screen. Then the counter starts counting again.
12-1 How to register
12. REGISTERING AND THE PATTERN TO DIRECT BUTTON
AND RELEASING THE PATTERN FROM DIRECT BUTTON
Register the pattern No. which are frequently used with the direct buttons for use.
Once the patterns are registered, the pattern selection can be performed with ease by pressing only the
button.
1) Display the direct pattern register screen.
When
1
switch is pressed, direct pat-
tern register button
2
is displayed on the
screen.
When this button is pressed, the direct pattern
register screen is displayed.
1
2
1