JUKI Sewing Machine - Releasing Procedure of the Warning

–
143
–
The same information as that in the normal
maintenance and inspection information screen
is displayed in the maintenance and inspection
information screen.
When button
3
of the item you desire to change
the inspection time is pressed, the inspection
time input screen is displayed.
When the designated inspection time is reached, the
warning screen is displayed.
In case of clearing the inspection time, press CLEAR
button
2
. The inspection time is cleared
and the pop-up is closed. In case of not clearing
the inspection time, press CANCEL button
1
and close the pop-up. Every time one sewing is
completed, the warning screen is displayed until the
inspection time is cleared.
Warning Nos. of the respective items are as
follows.
• Needle replacement : A201
• Cleaning time : A202
• Oil replacement time : A203
(Grease-up time)
3) Input the inspection time.
Input the inspection time.
When the inspection time is set to "0", the
warning function stops.
When clear button
4
is pressed, the
value returns to the initial value.
The initial values of the inspection time of
respective items are as follows.
• Needle replacement : 0 (1,000 stitches)
• Cleaning time : 0 (hour)
• Oil replacement time : 1,028 (hour)
(Grease-up time)
* Grease-up time is the time that 30 days/month,
5 days/week and 8 hours/day are converted to
6 months.
When ENTER
5
button is pressed, the
inputted value is determined.
17-3 Releasing procedure of the warning
The calculating method is
×
5 days
×
8 hours.
7 days
30 days
×
6 months
（
）
4
3
5
2
1