–
140
–
17-1 Observing the maintenance and inspection information
17. INFORMATION FUNCTION
There are three functions below in the information function.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specied and
the warning notice can be performed after the lapse of the specied time.
Refer to
"17-1 Observing the maintenance and inspection information"
and
"17-2 Inputting the
maintenance and inspection time"
.
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is
increased as well by the function to display the target output and the actual output.
Refer to
"17-4 Observing the production control information"
and
"17-5 Performing setting of
the production control information"
.
3) Information on machine working ratio, pitch time, machine time and machine speed can be displayed
from the working state of the sewing machine.
Refer to
"17-6 Observing the working measurement information"
.
1) Display the information screen.
When information key
1
of the switch
seat section is pressed in the data input screen,
the information screen is displayed.
1
2
2) Display the maintenance and inspection
information screen.
Press maintenance and inspection
informationscreen display button
2
in the
information screen.
To Next Page
Loading...
Need help?
General
