22 PC Setup Program
280
Program start
Once installation is complete, you can start the PC setup program from the Win-
dows®
1
Start menu.
22.3 Logging onto the setup program
The user name and password are not requested following initial installation of
the setup program. In the "Extras" menu, the "Renew login / Change password"
function can be used to activate this request when the program starts.
⇨ Chapter 22.6.3 "Extras", page 295
A distinction can be made between the "Specialist" and "Maintenance" users
when the log-in function is activated. The two users have different rights regard-
ing access to functions of the PC setup program.
⇨ Chapter 22.3.1 "Rights in the setup program", page 281
If the prompt is active, the user must log on:
a
To install the full version, you must acquire an appropriate license from JUMO. The contact data
can be found on the back of this document.
NOTE
If the "30-days test version" option is selected during installation, the JUMO PC
setup program is fully functional for 30 days. At the end of 30 days, the program
switches automatically to a "demo version" where some
functions such as data transmission, data storage and printing no longer work.
The software can be licensed at a later
date.
1.Microsoft and Windows 7 are registered trademarks of Microsoft Corporation.
To Next Page
Loading...
