JUMO AQUIS touch P - USB Interfaces

23 Technical data
376
23.9.6 USB interfaces
Interface Use Support Connection Version
USB host interface Extract measurement
data memory
a
,
Read/write device
settings,
Save Service data
b
,
Update the firmware
a
The recording function stores measurement data in a ring buffer inside the device.
b
Service data can be stored on a USB flash drive for diagnostic purposes.
USB flash drive USB port
Type A
USB 2.0
USB device interface Device setting via PC
setup program,
Extract, archive, evalu-
ate
measurement data
JUMO PC setup
program,
JUMO PCC/PCA
3000
software
USB port
Type Mini-B
41
1
5