295
22 PC Setup Program
22.6.3 Extras
Enable program options
Activates optional functions of the PC setup program (entry of additional license
numbers). Using this function, the PC setup program can also be registered with
a valid license number at a later date (30-days test version or full version) if a
valid license number was not entered during the installation (demo mode).
Renew login / Change password
Opens a window to activate user login. After the JUMO PC setup program has
been installed, prompts for the user name and password do not appear until
user login has been activated. The user is logged on initially as "Specialist" with
a blank password. This function activates the user and password prompt when
the program starts and the current password is changed.
Text library...
Opens a window for editing the text library. The various operating languages for
the device are saved in the text library. When a new setup file is generated, the
languages are copied to the setup file. If necessary, they can be edited there in
the "Country settings" menu. The order of the languages can be changed and
also is observed during transfer to the setup file. The first two languages (lan-
guage 1 and language 2) are transferred to the device and can be selected
there. In various submenus, the "Language" button permits editing of the re-
spective language.
Chapter "Language button", page 318
Version library
Shows the content of the version library. The list contains the standard versions
of the device software and the compatible hardware versions provided by the
device manufacturer together with the PC setup program. Additional software
versions that were imported subsequently (e.g. customer-specific versions) are
also contained.
To Next Page
Loading...
