Juniper MX10004 - Page 120

5. Remove the cardboard accessory box.
6. Remove the foam padding from the top of the box.
7. Remove the plasc cover from the router chassis.
8. Use a mechanical li to li the chassis from the shipping pallet. Otherwise, unload all of the
components, except the fan tray controller, and manually li the chassis from the shipping pallet.
See Figure 35 on page 110 and "Mount the Juniper Networks MX10004 Router Using the
JNP10004-RMK-4POST Rack-Mount Kit" on page 120.
Figure 35: Li the Chassis O the Pallet
NOTE
: The chassis has two handles that are designed for subtle posioning of the chassis.
Do not li the chassis by the handles.
9. Unpack the accessory box and lay out the contents so that they are ready for use.
10. Verify that your order includes all appropriate parts. See "Compare the MX10004 Router Order to
the Packing List" on page 112 and "MX10004 Components and Conguraons" on page 11 for
informaon about base conguraons and redundant conguraons.
11. Save the shipping box and packing materials to move or ship the router at a later me.
110