Juniper MX10004 - Page 134

a. Load the router onto the li, making sure that it rests securely on the li plaorm (see Figure 40
on page 124).
Figure 40: Load the MX10004 onto a Mechanical Li
b. Using the li, align the router in front of the rack, centering it in front of the mounng tray.
c. Li the chassis approximately 0.75 in. (1.9 cm) above the surface of the mounng tray. Align the
chassis as close as possible to the mounng tray.
If you are mounng the router manually:
a. Align the router in front of the rack or cabinet, centering it in front of the mounng tray. Use a
pallet jack if one is available.
WARNING: To prevent injury, keep your back straight and li with your legs, not
your back. Do not twist your body as you li. Balance the load evenly and be sure
that your foong is rm.
124