Juniper MX10004 - Page 39

Fan Tray Controller
The MX10004 supports two fan tray controllers to provide the control logic and power to hot-insert and
hot-remove a fan tray
JNP10004-FTC2—Supports model JNP10004-FAN2; see Figure 15 on page 29.
Figure 15: Fan Tray Controller JNP10004-FTC2
WARNING: Do not mix the fan tray controller models. Use only the supported fan tray
model for each fan tray controller. See Table 8 on page 29.
Table 8: Fan Tray Controller
Specicaons
Specicaon JNP10004-FTC2
Corresponding fan tray model JNP10004-FAN2
Height 1.5 in. (3.81 cm)
Width 6.5 in. (15.24 cm)
Depth 12.4 in. (31.5 cm)
Weight 1.1 lb (0.5 kg)
29