For connecon to AC systems, Juniper Networks provides a cable with either a NEMA 30-A connector
(Figure 21 on page 48) or an IEC 330P6W connector (Figure 22 on page 48).
Figure 21: NEMA 30-A Locking Connector
Figure 22: IEC 330P6W Connector
Table 17: 30-A Cabling Opons
Opon Locale Cord Set
Rang
Plug Standards Connector Spare Juniper Model
Number
HVAC/
HVDC
power cord
Any 30 A 400 VAC UL 950 and IEC
60950
Anderson/straight
to bare wire
CBL-PWR2-BARE
Any 30 A 400 VAC UL 950 and IEC
60950
Anderson/right-
angle to bare wire
CBL-PWR2-BARE-RA
AC power
cord
Connental
Europe
30 A 250 VAC UL 950 and
IEC332P6
Anderson/right-
angle to IEC 332P6
CBL-
PWR2-332P6W-RA
Connental
Europe
30 A 250 VAC UL 950 and
IEC332P6
Anderson/straight
to IEC332P6
CBL-PWR2-332P6W
48