Juniper MX10016 Hardware Guide

Figure 48: Loading an MX10016 into a Rack Using a Mechanical Lift
g100421
3. Using the lift, align the router in front of the rack, centering it in front of the base brackets.
4. Lift the chassis approximately 0.75 in. (1.9 cm) above the surface of the base brackets. Align the chassis
as close as possible to the base brackets.
5. Carefully slide the chassis onto the base and rear mounting brackets until the chassis flanges contact
the rack rails. The mounting brackets ensure that the holes in the flanges align with the holes in the
rack rails. See Figure 49 on page 142.
141

Juniper MX10016 Specifications

General

Brand	Juniper
Model	MX10016
Category	Network Hardware
Language	English