Table 11: Fan Tray LEDs on an MX10016 (continued)
DescriptionStateColorName
The center SFB behind the left fan tray is
online.
On steadilyGreenSFB 1 status
The beacon feature is enabled. This feature
is enabled using the request chassis
beacon command.
BlinkingGreen
An error has been detected in SFB 1.
Replace the SFB as soon as possible. The
SFB is located behind the left fan tray and
is the middle SFB in the grouping of 3. To
maintain proper airflow through the
chassis, leave the fan tray installed in the
chassis until you are ready to replace the
SFB.
BlinkingYellow
The SFB is offline.OffNone
The rightmost SFB behind the left fan tray
is online.
On steadilyGreenSFB 2 status
The beacon feature is enabled. This feature
is enabled using the request chassis
beacon command.
BlinkingGreen
An error has been detected in SFB 2.
Replace the SFB as soon as possible. The
SFB is located behind the left fan tray and
is the rightmost SFB in the grouping of 3.
To maintain proper airflow through the
chassis, leave the fan tray installed in the
chassis until you are ready to replace the
SFB.
BlinkingYellow
The SFB is offline.OffNone
53
To Next Page
Loading...
Need help?
General
