Juniper MX10016 Hardware Guide

Initial Installation and Configuration
3
MX10016 Installation Overview | 127
Unpacking an MX10016 Router and Components | 128
Unpacking an MX10016 | 128
Unpacking Line Cards, Routing and Control Boards, and Switch Fabric Boards | 131
Comparing the MX10016 Order to the Packing List | 132
Installing the Mounting Hardware | 136
Installing an MX10016 into a Four-Post Rack | 139
Mounting an MX10016 in a Four-Post Rack Using a Mechanical Lift | 139
Installing the Front Panel on an MX10016 | 142
Connecting an MX10016 to Power | 145
Connecting an MX10016 to Earth Ground | 146
Connecting AC Power to an MX10016 | 148
Connecting DC Power to an MX10016 | 149
Connecting an MX10016 to External Devices | 150
Connecting an MX10016 to a Network for Out-of-Band Management | 150
Connecting an MX10016 Router to a Management Console | 151
Configuring an MX10016 Router | 152
Maintaining Components
4
Field-Replaceable Units in an MX10016 | 157
Removing and Installing Routing and Control Boards | 158
Removing a Routing and Control Board | 159
Installing a Routing and Control Board | 160
Removing and Installing MX10016 Cooling System Components | 162
Removing an MX10016 Fan Tray | 163
Installing an MX10016 Fan Tray | 166
Removing an MX10016 Fan Tray Controller | 168
Installing an MX10016 Fan Tray Controller | 170
vi

Juniper MX10016 Specifications

General

Brand	Juniper
Model	MX10016
Category	Network Hardware
Language	English