Juniper MX10016 Hardware Guide

Removing and Installing MX10016 Power System Components | 172
How to Remove a JNP10K-PWR-AC Power Supply | 172
How to Install a JNP10K-PWR-AC Power Supply | 175
How to Remove a JNP10K-PWR-AC2 Power Supply | 179
How to Install a JNP10K-PWR-AC2 Power Supply | 183
How to Remove a JNP10K-PWR-DC Power Supply | 187
How to Install a JNP10K-PWR-DC Power Supply | 190
How to Remove a JNP10K-PWR-DC2 Power Supply | 197
How to Install a JNP10K-PWR-DC2 Power Supply | 200
Removing and Installing MX10016 Switch Fabric Boards | 208
Handling and Storing MX10016 Line Cards, RCBs, and SFBs | 209
Handling Line Cards and Routing and Control Boards | 209
Handling Switch Fabric Boards | 211
Storing Line Cards, RCBs, and SFBs | 212
Removing an MX10016 Switch Fabric Board | 212
Installing an MX10016 Switch Fabric Board | 217
Replacing an MPC | 222
Removing an MPC | 222
Installing an MPC | 225
Installing the Cable Management System | 227
Removing and Installing Transceivers and Fiber-Optic Cables | 230
Removing a Transceiver | 231
Installing a Transceiver | 233
Disconnecting a Fiber-Optic Cable from a Router | 235
Connecting a Fiber-Optic Cable to a Router | 236
Maintaining Fiber-Optic Cables in a Router | 237
Removing an MX10016 Router | 238
Powering Off an MX10016 Router | 238
Removing an MX10016 Router From a Four-Post Rack Using a Mechanical Lift | 240
vii

Juniper MX10016 Specifications

General

Brand	Juniper
Model	MX10016
Category	Network Hardware
Language	English