6-10
Technical requirements and instructions
Check tire pressure using the
test pressure gauge.
See subsection «Tire maintenance».
Check the condition of com-
pressor drive belt in the air
condtioning system.
Prior to inspection shut down the engine.
Visually check the condition of belt Cracks are tolerable. Crossing of trans-
verse and longitudinal cracks is not permissible. Be sure to change belt if any pit-
ting.
Inspect the integrity of electric
contacts in the air conditioning
system.
Check visually the integrity of electric contacts in the air conditioning system.
Check the integrity of refriger-
ant hoses in the conditioning
system.
Inspect visually. Damages on refrigerant hoses are not permitted. Connection
cables must be secured reliably and have no damages.
To Next Page
Loading...