To Next Page

To Previous Page

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference

077085503 / March 2019 7-75

[:SOURce[n]]:DELay:STATe

This command enables or disables the delay that occurs when the source is turned on.

Type

Affected by

Where saved

Default value

Command and query

Recall settings

Instrument reset

Power cycle

Save settings

1 (ON)

Usage

[:SOURce[n]]:DELay:STATe <state>

[:SOURce[n]]:DELay:STATe?

[n]

Channel number: For single-channel instruments, the value is 1

<state>

Disable the source delay: OFF or 0

Enable the source delay: ON or 1

Details

This command is used to enable or disable source delay. When enabled, the instrument will delay for

a period that is set by the command:

[:SOURce[n]]:DELay

Example

:DEL:STAT ON

:DEL:STAT?

Turn on source delay and query the state. The

output is: 1.

Also see

[:SOURce[n]]:DELay (on page 7-74)

Keithley 2280S-32-6 Reference Manual

Other manuals for Keithley 2280S-32-6