Keithley 2280S-32-6 Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-143
:TRACe[n]:SAVE
This command saves data from the specified reading buffer to a USB flash drive.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:TRACe[n]:SAVE <fileName>
:TRACe[n]:SAVE <fileName>, <timeFormat>
:TRACe[n]:SAVE <fileName>, <timeFormat>, <start>, <end>
[n]
Channel number: For single-channel instruments, the value is 1
<fileName>
A string that indicates the name of the file on the USB flash drive in which to save
the reading buffer
<timeFormat>
Defines which information is saved in the file on the USB flash drive:
 Dates, times, and fractional seconds are saved; the default value: TSTamp
 Relative time stamps (in seconds) are saved: RELative
 Relative time stamps are saved: RSTamp
For details about time format, see :TRACe[n]:DATA? (on page 7-136)
<start>
Defines the starting point in the buffer to start saving data
<end>
Defines the ending point in the buffer to stop saving data
Details
For options that save more than one item of time information, each item is comma-delimited. For
example, the default format is date, time, and fractional seconds for each reading.
Example
:TRAC:SAVE "myData"
:TRAC:SAVE "myDataRel", REL
:TRAC:SAVE "myDataRel100",REL,1,100
Save all readings and default time information to a file
named myData.csv on the USB flash drive.
Save all readings and relative time stamps to a file
named myDataRel.csv on the USB flash drive.
Save the buffer readings from 1 through 100 to a file
named myDataRel100.csv on the USB flash drive.
Also see
None

Keithley 2280S-32-6 Specifications

General

Brand	Keithley
Model	2280S-32-6
Category	Power Supply
Language	English