Series 2280 Precision DC Power Supply Reference Manual Section 6: Introduction to SCPI commands
077085503 / March 2019 6-5
Using the SCPI command reference
The SCPI command reference contains detailed descriptions of each of the SCPI commands that you
can use to control your instrument. Each command description is broken into several standard
subsections. The figure below shows an example of a command description.
Figure 93: SCPI command description sample
Each command listing is divided into five subsections that contain information about the command:
Command name and summary table
Usage
Details
Example
Also see
The content of each of these subsections is described in the following topics.
To Next Page
Loading...
Need help?
General
