Keithley 2280S-32-6 - Display Subsystem; Display:brightness

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-47
DISPlay subsystem
This subsystem contains commands that control the front-panel display.
:DISPlay:BRIGhtness
This command sets and queries the brightness of the front-panel display.
Type
Affected by
Where saved
Default value
Command and query
Not applicable
Nonvolatile memory
ON50
Usage
:DISPlay:BRIGhtness <brightness>
:DISPlay:BRIGhtness?
:DISPlay:BRIGhtness? DEFault
:DISPlay:BRIGhtness? MINimum
:DISPlay:BRIGhtness? MAXimum
<brightness>
The brightness of the display: 5 to 100%.
Details
This command determines the brightness of the front-panel display.
Screen life is affected by how long the screen is on at full brightness. The higher the brightness
setting and the longer the screen is bright, the shorter the screen life.
Example
:DISP:BRIG 50
Set the display brightness to 50%
Also see
None