Keithley 2280S-32-6 - Status:questionable:instrument:isummary[:Event]; Status:questionable:instrument:isummary:enable

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-109
:STATus:QUEStionable:INSTrument:ISUMmary[:EVENt]?
This command reads the Operation Instrument Summary Event Register of the status model.
Type
Affected by
Where saved
Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
:STATus:QUEStionable:INSTrument:ISUMmary[:EVENt]?
Details
This attribute reads the Questionable Instrument Summary Event Register of the status model and
clears the register.
The instrument returns a decimal value that corresponds to the binary-weighted sum of all bits set in
the register.
Example
:STAT:QUES:INST:ISUM?
Returns the contents of the Questionable
Instrument Summary Event Register of the
status model.
Also see
Questionable Instrument Summary Event Register (on page D-16)
:STATus:QUEStionable:INSTrument:ISUMmary:ENABle
This command sets or reads the contents of the Questionable Instrument Summary Event Enable Register of the
status model.
Type
Affected by
Where saved
Default value
Command and query
Power cycle
Not applicable
0
Usage
:STATus:QUEStionable:INSTrument:ISUMmary:ENABle <n>
:STATus:QUEStionable:INSTrument:ISUMmary:ENABle?
[n]
The status of the Questionable Instrument Summary Event Enable
Register
Details
This command sets or reads the contents of the enable register of the Questionable Instrument
Summary Event Register (QISER).
When one of these bits is set and the corresponding bit in the QISER is set, bit 1 in the Questionable
Instrument Event Register is set.
When sending binary values, preface <n> with #b. When sending hexadecimal values, preface <n>
with #h. No preface is needed when sending decimal values.