Section 11: Remote operations Model 6517B Electrometer Reference Manual
11-4 6517B-901-01 Rev. C / August 2015
Pin number Designation
2 Transmitted Data (Tx)
3 Received Data (Rx)
5 Signal Ground (Gnd)
Selecting interface parameters
Communication menu
The COMMUNICATION menu option allows you to select and configure the GPIB or RS-232 bus.
Use the MENU key to access this menu option (see Menu (on page 2-18) for more information).
Note that selecting the alternate interface (GPIB or RS-232) resets the instrument to the power-on
defaults. This reset action causes the instrument to exit from the MAIN MENU.
To Next Page
Loading...
