Model 6517B Electrometer Reference Manual Section 14: SCPI command reference
6517B-901-01 Rev. C / August 2015 14-5
:MEASure[:<function>]?
This command combines all of the other signal-oriented measurement commands to perform a "one-shot"
measurement and acquire the reading.
Usage
:MEASure[:<function>]?
<function>
The function:
ï‚· CURRent[:DC]: Amps function
ï‚· RESistance: Ohms function
ï‚· CHARge: Coulombs function
Details
This command combines all of the other signal oriented measurement commands to perform a "one-
shot" measurement and acquire the reading.
Also see
:FETCh? (on page 14-2)
:CONFigure:<function> (on page 14-3)
READ? (on page 14-4)