Section 14: SCPI command reference Model 6517B Electrometer Reference Manual
14-170 6517B-901-01 Rev. C / August 2015
:READings <NRf>
This command specifies the number of readings to store for the alternating polarity resistance/resistivity test.
Usage
:TSEQuence:ALTPolarity:READings <NRf>
:READings?
<NRf>
1 to MAXimum Number of readings
DEFAULT 1
MAXimum See Table 8-2
MINimum 1
Details
:READings? queries number of readings to store.
Also see
None
:DISCard <NRf>
This command specifies the number of initial readings to discard for the alternating polarity resistance/resistivity
test.
Usage
:TSEQuence:ALTPolarity:DISCard <NRf>
:DISCard?
<NRf>
0 to 9999 number of readings to discard
Details
Specify the number of readings to initially discard.
DISCard? queries the number of discarded readings.
Also see
None
To Next Page
Loading...
