Keithley 6517B

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual
14-26 6517B-901-01 Rev. C / August 2015
:TRIGger command summary
Command Description Default parameter SCPI
:INITiate
Subsystem command path:

[:IMMediate]
Initiate one trigger cycle

:CONTinuous <b>
Enable or disable continuous initiation (Note 1)

:CONTinuous?
Query continuous initiation

:POFLag <name>
INCLude or EXCLude no pending flag
for initiate commands
INCLude
:POFLag?
Query pending operation flag
:ABORt
Reset trigger system

:ARM[:SEQuence[1]]
Path to configure arm layers:

[:LAYer[1]]
Path to program Arm Layer 1:

:IMMediate
Loop around control source

:COUNt <n>
Specify arm count (1 to 99999, or INF) 1

:COUNt?
Query arm count

:SOURce <name>
Select control source (HOLD,
IMMediate, RTCLock, MANual, BUS,
TLINk, or EXTernal)
IMMediate
(Note 2)
:SOURce?
Query control source

:SIGNal
Loop around control source

:TCONfigure
Path to configure triggers:
:DIRection
<name>
Enable (SOURce) or disable
(ACCeptor)
ACCeptor
:DIRection?
Query direction
:ASYNchronous
Path to configure asynchronous
trigger link:
:ILINe
<NRf>
Select input line (1 to 6) 2
:ILINe?
Query input line
:OLINe
<NRf>
Select output line (1 to 6) 1
:OLINe?
Query output line
:RTCLock
Path to configure the RTCLock
control source:
:DATE <yr>,
<mo>, <day>
Specify the date for the clock event
:DATE?
Query the date for the clock event
:TIME <hr>,
<min>, <sec>
Specify the time for the clock event
:TIME?
Query the time for the clock event
:LAYer2
Path to program Arm Layer 2:

:IMMediate
Loop around control source

:COUNt <n>
Specify scan count (1 to 99999 or INF) (Note 3)

:COUNt?
Query scan count
