Keithley 6517B Reference Manual

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual
14-34 6517B-901-01 Rev. C / August 2015
:MA1Factor <NRf>
This command is used to specify the "a1" factor.
Usage
:CALCulate[1]:KMATh:MA1Factor <NRf>
:MA1Factor?
<NRf>
 -9.999999e20 to +9.999999e20
Details
This command is used to specify the "a1" factor for the polynomial calculation.
Also see
None
:MA2Factor <NRf>
This command is used to specify the "a2" factor.
Usage
:CALCulate[1]:KMATh:MA2Factor <NRf>
:MA2Factor?
<NRf>
 -9.999999e20 to +9.999999e20
Details
This command is used to specify the "a2" factor for the polynomial calculation.
Also see
None
:PERCent <NRf>
This command is used to specify percent target value.
Usage
:CALCulate[1]:KMATh:PERCent <NRf>
:PERCent?
<NRf>
 -9.999999e35 to +9.999999e35: Specify target value for percent
calculation
Details
This command is used to specify the target value for the percent calculation.
Also see
None

Keithley 6517B Specifications

General

Input Impedance	>200 TΩ
Electrometer Type	Electrometer/High Resistance Meter
Current Measurement Range	20 fA to 20 mA
Display	Vacuum Fluorescent Display
Communication Interfaces	IEEE-488 (GPIB), RS-232
Power Supply	100 V / 120 V / 220 V / 240 V; 50 Hz / 60 Hz
Resistance Measurement Range	Up to 200 TΩ