To Next Page

To Previous Page

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual

14-154 6517B-901-01 Rev. C / August 2015

:SSYNchronous:LINE <NRf>

This command is used to specify the semi-synchronous trigger link for the measure layer.

Usage

:TRIGger[:SEQuence[1]]:TCONfigure:SSYNchronous :LINE <NRf>

:LINE?

<NRf>

 1: Line #1

 2: Line #2

 3: Line #3

 4: Line #4

 5: Line #5

 6: Line #6

Details

This command is used to select one of the six trigger lines for the semi-synchronous trigger link.

Also see

None

RTCLock commands

The following commands are used to specify the date and time for the RTCLock control source (see :TSTamp

commands (on page 14-127) for more information).

:DATE <yr>, <mo>, <day>

This command is used to set the date for the RTCLock control source.

Usage

:ARM[:SEQuence[1]][LAYer[]]:RTCLock:DATE <yr>, <mo>, <day>

:DATE?

<yr>

 2005 to 2104: Specify year

 <mo> = 1 to 12: Specify month

 <day> = 1 to 31: Specify day

Details

This command is used to set the date for the RTCLock control source. Setting an invalid date (for

example, February 30, 2007) for the clock event results in an error and the previous date is retained.

Also see

None

Keithley 6517B Reference Manual

Other manuals for Keithley 6517B