Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual Section 14: SCPI command reference
6517B-901-01 Rev. C / August 2015 14-49
:CNDisplay
This command clears (cancels) NEXT display.
Usage
:DISPlay:CNDisplay
Details
This action command is used to clear the bottom display of NEXT (or PREV) messages and cancel
the operations associated with them. This command has no effect on any other message types.
Also see
None
:SMESsage <b>
This command is used to control the status messages.
Usage
:DISPlay:SMESsage <b>
:SMESsage?
<b>
 0 or OFF
 1 or ON
Details
This command is used to enable/disable the status message mode. The status message mode is a diagnostic tool
that provides real-time messages that relate to the current operating state of the instrument.
Also see
Status and error messages (on page 2-11)

Keithley 6517B Specifications

General

Input Impedance	>200 TΩ
Electrometer Type	Electrometer/High Resistance Meter
Current Measurement Range	20 fA to 20 mA
Display	Vacuum Fluorescent Display
Communication Interfaces	IEEE-488 (GPIB), RS-232
Power Supply	100 V / 120 V / 220 V / 240 V; 50 Hz / 60 Hz
Resistance Measurement Range	Up to 200 TΩ