Section 15: Calibration procedure Model 6517B Electrometer Reference Manual
15-30 6517B-901-01 Rev. C / August 2015
Error Code Description
+617 Questionable test sequence
+618 Resistivity: current out of limits
+700 Low battery detected
+800 RS-232 framing error detected
+802 RS-232 overrun detected
+803 RS-232 break detected
+805 Invalid system communication
+808 ASCII only with RS-232
+809 Not allowed with RS-232
+850 Invalid sequence settings
+851 Test sequence running
+860 Interlock violation error
+861 Vsource limit too low for auto-ohms
+900 Internal system error
To Next Page
Loading...
Need help?
General
