09 Creating your own voices | 99
o Art: as Art. Toggle, with the difference that, holding down the FAST
button activate the Second voice; when it is released, the First voice
plays.
The second group of options concerns the control of the WAH-WAH effect:
• WAH-WAH: The first button turns the WAH-WAH effect on or off.
• MODE: the button linked to the first one determines the control assigned to
activate the effect:
o Module. Wheel
o Pedal
More effects are available:
• HARMONY/TYPE: This effect harmonizes notes played with your right hand in the
right section of the split point, based on the chord played in the chord recognition
section.
The TYPE parameter allows the values: Full1, Full2, Cntry Up, Cntry Down, Bluegr.
Up, Bluegr.Down, Folk1, Folk2 and 2 Hands.
• NOTE MORPH./CROSS TIME: Define the transition time from one sound to
another.
• LEGATO: These buttons are activated when at least one voice in the layer has
Legato enabled in its configuration.
o LEGATO can be set to polyphonic (POLY) or monophonic (MONO).
o The value of the SMOOTH parameter determines the precise position of
the attack (from 1 to 24).
o With the SMART LEGATO functionality, as long as you play one note at a
time, the sound is legato; if you play a chord (two or more notes
simultaneously), the sound is polyphonic and no longer legato.
• VOICE MODE: Can be activated or not in Normal, Duet1, Duet2, Steel, Trio1, Trio2,
• AUTOTAB: If there is at least one setting in the HARMONY entries, it turns on the
button of the panel..
• DOUBLE: This effect is applied to all three-layer items if active. In the case of
Down it adds the lower octave of the note played, while Up adds the upper octave
of the note played.
To Next Page
Loading...
