124 | 10 Creating your own styles
BASS and CHORD CONTROLS
The available CONTROLS can be assigned differently on BASS and CHORDS tracks.
The available parameters are as follows:
• Reso: Applies Resonance (1/127) to the selected track.
• Arabic Scale: Activates (ON/OFF) the reading in Arabic Scale mode of the selected
track.
• Pitch Range: Sets the excursion (1/127) of the Pitch Bend that will be applied on
the track.
• Bend Assign: In the programming of the track you can use the Bend assigned to
different utilities (PITCH, ROTOR, PORTAMENTO).
• Mod. to Filter: Activates (ON/OFF) the Modulation on the filter of the selected
track.
• Port.to: Portamento (ON/OFF).
• Port. to Time: Sets the Time Posture to the selected Track.
• Mono/Poly.
Pay attention!
• These controls are instantly active without the need to confirm via the ENTER
button.
• Rotor can only be placed on track CHORD 3.
VELOCITY OCTAVE
In this "transformation" video page, you can apply your changes that affect the dynamics of
the notes already recorded and their octave of reproduction. Again, changes are made to the
originally selected track.
To Next Page
Loading...
