KETRON EVM - Page 146

12 Effects | 141
TREMOLO parameters:
• ON/OFF: Enable or disable.
• Type: TREMOLO (Mono), AUTOPAN (Stereo).
• Shape: TRIANGLE, SQUARE.
• Depth: Intensity of modulation.
• Rate: Frequency.
WAH WAH parameters:
• ON/OFF: Enable or disable.
• Mode: VELO UP, VELO DOWN, VELO SHARP, AUTO.
• FILTER Type: BAND PASS, LOW PASS.
• Q: Bandwidth (0 to 127).
• LFO Amount: Amplitude of the input signal.
• Rate: Frequency.