142 | 12 Effects
DELAY parameters:
• ON/OFF: Enable or disable.
• Time: Delay time of the replicated signal.
• Pre LP Filter: Low Pass filter intensity.
• Mode: Mono or Stereo.
• Level: Intensity level.
• Feedback: Number of repetitions.
• HF Damping: is the progressive attenuation of acute frequencies (High Frequency
Damping), a value between 0 and 127.
EDIT | GLOBAL EQUALIZER
In the DSP EFFECT CONTROL page on the screen, touching the EDIT button, next to
GLOBAL EQUALIZER, you get this page where you can act on EQ parameters as on a
parametric equalizer.
• For each frequency band (Low, Mid-Low, Mid-Hi and Hi):
• GAIN: Customize the gain from -12dB to +12dB to increase or filter frequency
bands.
• FREQ: Define the centre frequency of each band.
• SAVE: Save your changes.
• FACTORY RESTORE: Restores previously saved changes to their original factory
values.
To Next Page
Loading...
