20 | 02 Playing the voices
Step by step:
1. Press the DRAWBAR button on the panel to activate the drawbars.
2. Touch the Drawbar icon on the screen to activate its management on the screen.
3. Press the UP/DOWN or ENTER button to scroll through the 24 Drawbar organ
sounds.
4. Select the voice from those displayed on the screen.
5. Set the volume of the Drawbar voice using the dedicated volume slider on the
panel.
You are now ready to play an organ voice, but as with any self-respecting organ, you now
have access to several other typical controls.
Please note! These sounds are also heard together with VOICE 1 and/or VOICE2 if these are
turned on.
To Next Page
Loading...
