03 Playing with the styles | 35
fast one. You can choose whether to activate Morphing by using AFTERTOUCH,
using the optional SUSTAIN pedal or whether to disable it all together.
• INTRO MODE: This determines what interuptions can be applied to the INTRO of
styles when playing.
o If the value is set to NOT STOPPED BY A, B, C, D , then as the INTRO of
the style plays (typically more noticable with INTRO 2 and INTRO 3 which
have a longer number of measures), they always finish playing completley
before the style moves on to play one of the ABCD variations.
o If the value is set to STOPPED BY A, B, C, D then by simply pressing any of
the variations while the INTRO plays (ABC or D), the INTRO is imemdiately
interupted and the style immediately starts to play the variation that has
been activated
o INTO TO ARR A: When turned on, this means that when you press one of
the INTRO keys, the arranger automatically sets variation A as the next
variation to play once the INTRO is complete, regardless of which
Variation was selected on the panel prior to starting the style.
• FILL MODE: Determining when a FILL in is played. Trigger fills with minimum
button pushing while you focus on playing.
o AUTO: with AUTO turned on, every time you change the ABC or D variation,
the arranger inserts a FILL measure (some styles have a specific pattern for
each target variation, others have one for ABCD). This property can be
saved in a CUSTOM STARTUP.
o TO ARRANGE: by pressing the FILL button on the panel, the arranger plays
the next variation immedately the FILL has been played (e.g. if you are
playing variation A, the arranger plays the FILL and then immediately
switches to variation B ... if playing B, then onto C ... and so on until D, then
returns to A automatically).
o AFTERTOUCH: activates the FILL when you apply more pressure on the
keys when changing chords.
o FILL: as an alternative to the DEFAULT usage, you can set it up such that
one of the FILLS (1, 2, 3 or 4) directly activates TO END, i.e. the particular
FILL (when pressed) will lead directly to the instant ending of the style. It is
useful when you want to end a style immediately, without going through
the normal ENDINGS 1, 2 or 3.
• FILL/BREAK: Enables or disables the ability to switch voices when in AUTOREPEAT.
It is obtained by holding down the button (or the Footswitch assigned to
FILL/BREAK). If activated, the Fill and Break in AUTOREPEAT are no longer
performed in sequence, but the FILL/BREAK note for variation A, B, C, D is
repeated. The function can be saved in CUSTOM STARTUP.
• BREAK MODE: This establishes the activation time of the BREAK pattern.
o AS FILL: when the FILL is pressed, it follows the setting of the FILL
parameter (see above).
o END MEASURE: the BREAK pattern is started only after the current
measure of the variatio is complete, that is, at the start of the next measure.
To Next Page
Loading...
