Setting Commands GPIB LAN
Set the output voltage: VOLT<n> 0.5 ms 2.5 ms
Set the unitto the resetstate: *RST 10.5 ms 11.5 ms
Query Commands
Return the voltage setting: VOLT? 1.3 ms 5 ms
Return the output setting: OUT? 1 ms 5.5 ms
Return 10 point measurement: MEAS:VOLT? 6 ms 9.5 ms
Return 10 point fetch: FETC:VOLT? 1.5 5 ms
Return 1 NPLC measurement: MEAS:VOLT? 28 ms 32.5 ms
Return 1 NPLC fetch: FETC:VOLT? 5.5 ms 10 ms
Return 25 k point measurement: MEAS:VOLT? 180 ms 182 ms
Return 25 k point fetch: FETC:VOLT? 32.5 ms 36.7 ms
Return 25 k point ASCII array fetch: FETC:ARR:VOLT? 9267 ms 5818 ms
Return 25 k point binary array fetch: FETC:ARR:VOLT? 558 ms 537 ms
Keysight N6900/N7900 Series Operating and Service Guide 208
6 SCPI Programming Reference
To Next Page
Loading...
Need help?
General
